The BF40 is packed with power and exceptional torque. Featuring a unique set of Honda-Exclusive technologies, the BF40 will easily power all of your adventures.

BOOSTED LOW SPEED TORQUE (BLAST)

Honda’s revolutionary BLAST™ technology provides strong hole shot performance, getting the hull on the plane quicker. This air/fuel ratio and ignition-timing technology boosts engine torque at low RPM under rapid acceleration conditions. It’s NMEA compatible, meaning all engine data including speed, fuel consumption, cruising distance, etc can be displayed on the GPS screen.

BEST IN CLASS CHARGING

You’ll get best in class charging performance with the BF40 thanks to a 17-amp alternator. This means your outboard is able to charge the battery faster and power more accessories, so that you can now run a bit of extra tech on the boat to help you find the perfect catch.

MULTI-FUNCTION TILLER HANDLE

The BF40s multi-function tiller handle incorporates a power trim-tilt switch in the tiller handle, so the operator can trim the engine while underway and remain completely focused on the water. It also has a reversible shift lever, which can be mounted on the left or right side.

PROGRAMMED FUEL INJECTION (PGM-FI)

Honda’s renowned Programmed Fuel Injection is controlled by an advanced Engine Control Unit (ECU). Engine sensors precisely control the supply of fuel to the engine, providing easy starting, instantaneous throttle response and superior fuel economy. (BF40– BF250)

LEAN BURN CONTROL

Honda’s Lean Burn Control technology, ECOmo, permits combustion to operate on a leaner air/fuel ratio. Sensors precisely measure the air/fuel mixture, ensuring best fuel economy in cruising mode. (BF40 – BF250).

TROLLING CONTROL

Trolling Control is available from BF40 – BF150 & BF200-250 (DBW only). Available on selected Honda outboards, engine speed can be controlled in increments of 50RPM from idle speed to 1000RPM/1100RPM (model dependent). A switch required to activate this feature is available through your authorised Honda Marine dealer as an optional accessory. (BF40 – BF150)

 

ENGINE

TYPE 4-stroke SOHC 3-cylinders / 6-valves
DISPLACEMENT 808cc
BORE & STROKE 70 x 70 mm
FULL THROTTLE RPM RANGE 5,500-6,000 RPM
RATED POWER 50HP @ 5,750 RPM
COOLING SYSTEM Water cooled
INDUCTION Programmed Fuel Injection (PGM-FI)
IGNITION SYSTEM Transistorised battery ignition
STARTING SYSTEM Electric
EXHAUST Through prop
ALTERNATOR 17-Amp
POWER TRIM & TILT Available
GAS-ASSISTED TILT Available
TRIM RANGE -4° to +16°
TILT RANGE 63°

SAFETY FEATURES

EMERGENCY STOP SWITCH Standard
OIL PRESSURE ALERT Standard
TEMPERATURE ALERT Standard
REV-LIMITER Standard
SPEEDOMETER PICKUP Standard

DRIVE

GEAR RATIO 2.08:1
GEAR SHIFT F-N-R
PROPELLER 3-Blade Aluminium
DIAMETER X PITCH (S-TYPE) n/a
DIAMETER X PITCH (L-TYPE) 11-1/4 x 13 Inches
DIAMETER X PITCH (X-TYPE) 11-3/4 x 10 Inches

DIMENSIONS

OVERALL LENGTH 694mm
OVERALL WIDTH 372mm
OVERALL HEIGHT (S-TYPE) n/a
OVERALL HEIGHT (L-TYPE) 1,364mm
OVERALL HEIGHT (X-TYPE) 1,465mm
TRANSOM HEIGHT (S-TYPE) n/a
TRANSOM HEIGHT (L-TYPE) 521mm
TRANSOM HEIGHT (X-TYPE) 662mm
DRY WEIGHTS (L-TYPE) 100kg
DRY WEIGHTS (X-TYPE) 102kg

Contact Information

This boat has been inspected by an authorized dealer.

Message to Vendor

Make Honda
Model BF 40 hp
Condition New

Boat Insurance